Най-новият флагман на CCR рутерите на MikroTik - CCR1072, Tilera се захранва от 72 ядрен процесор, всяко ядро е клокнато на 1GHz. За да се използва напълно високата производителност, CCR1072 е екипиран с осем независимо свързани 10G SFP + портове. Устройството идва с инсталиран RouterOS L6, вградена 16 GB ECC RAM, цветен LCD сензорен екран, два Hotplug захранващи модула, слот за смарт карта, MicroUSB, USB, MicroSD и 2х М.2 слота за допълнителнo съхранение.
Благодарение на уникалния 72-ядрен процесор и портовете, които са директно свързани с централния процесор, CCR1072 е с производителност над 100 милиона пакети в секунда.
S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM.
Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well.
S+RJ10r2 е уникален модул предлагащ високоскоростна свързаност на базата на добре познатите мрежови кабели с усукани двойки и устройства с SFP+ порт. Всяко MikroTik устройство с SFP+ порт и активно охлаждане може да се използва без инсталиране на оптична мрежа, просто включете S+RJ10 и скоростта на вашата мрежа може да се увеличи до 10Gbps, правейки я готова за следващата генерация на RJ45 хардуер. S+RJ10се поддържа и от устройства с пасивно охлаждане, но може да е нужно допълнително охлаждане.
Подобрения във версия 2:We have improved S+RJ10 hardware and firmware. List of improvements:
- Jumbo frames up to 10218 Bytes are now supported; - Link speed reporting is fixed - actual link speed in the interface menu is listed. Previously 100M/1G/2.5G/5G link speeds were not reported correctly; - DDM monitoring (Supply Voltage, Module temperature) is now supported.
All units that we ship now are from new HW revision. You can distinguish new HW revision by "/r2" at the end of the serial number.
S+DA0001- DAC Еднометров кабел за директна връзка между две SFP или SFP+устройства, примерно два рутера от CCR или CRS сериите.
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.
S+DA0003 - DAC Триметров кабел за директна връзка между две SFP или SFP+устройства, примерно два рутера от CCR или CRS сериите.
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. They provide a low cost, low power and low latency interconnect solution for 10-Gigabit Ethernet, Fiber Channel and other industry standards, and are direct attached compliant and fully conform to the SFP+ MSA specifications.