EdgeMAX

Introducing the Ethernet Surge Protector Gen.2, model ETH-SP-G2, from Ubiquiti Networks. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti airMAX devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network. 

The ETH-SP-G2 is engineered to protect Power‑over‑Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. 

СПЕЦИФИКАЦИЯ

КРАТКА ИНСТРУКЦИЯ

NanoSwitch N-SW е външен 4-портов гигабитов суич с PoE passsthrough.

N-SW е външен 4-портов неуправляем суич с "винаги включен" PoE out(24V по 2 чифта) изход на три порта.

PoE In — RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch.

PoE Out — RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output.

NanoSwitch разполага с външен водоустойчив форм-фактор. Работна температура: -30 до 70 ° C (-22 до 158 ° F)

Екраниран конектор RJ-45 проектиран за TOUGHCable PRO. Монтаж без запояване. Опаковка 100бр.

Specifically designed for use with Ubiquiti TOUGHCables and available in 100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.

Екраниран конектор RJ-45 със заземяващ проводник проектиран за TOUGHCable PRO. Монтаж без запояване. Опаковка 20бр.

Specifically designed for use with Ubiquiti TOUGHCables and available in 20pcs. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.

By using a grounded Ubiquiti Power over Ethernet (PoE) Adapter along with Ubiquiti TOUGHCable and TOUGHCable Connectors, you can effectively protect against ESD attacks.

PoE захранващ адаптер, предназначен за  802.3af устройства - 48V 15W.

The 802.3af PoE Injector (U PoE AF) is designed to power 802.3af PoE devices. The U PoE AF delivers up to 15W of PoE that can be used to power the Access Point U6 Lite and other 802.3af devices. It can also provide enhanced protection against electrostatic discharge (ESD).

Features:

• • Delivers up to 15W of 802.3af PoE
  • Compatible with all 802.3af PoE devices
  • Surge, peak pulse, and overcurrent protection
  • AC cable with earth ground
  • Dynamic LED light that indicates device and current status
  • Compatible with TOUGHCable
  •  
  • СПЕЦИФИКАЦИЯ

PoE захранващ адаптер, предназначен за U6 LR, U6 Pro и други 802.3at устройства - 48V 30W.

The 802.3at PoE+ Injector (U PoE AT) is designed to power 802.3at PoE+ devices. The U PoE AT delivers up to 30W of PoE+ that can be used to power the Access Point WiFi 6 Long-range (U6 LR), Pro (U6 Pro), and other devices that adhere to the 802.3at PoE+ standard. It also provides enhanced protection against electrical surges.

Features:

• • Delivers up to 30W of PoE+
  • Compatible with the U6 LR, U6 Pro, and other 802.3at PoE+ devices
  • Surge and clamping protection
  • AC cable with earth ground
• СПЕЦИФИКАЦИЯ

Ubiquiti Networks introduces UniFi® Category 6 Indoor Ethernet Cable for your high-speed UniFi and general indoor network deployments.Available in lengths of 1000 ft (304 m), UniFi Cable is Category 6 UTP (Unshielded Twisted Pair) cabling that supports speeds of up to 10G Ethernet. It uses 23 AWG solid copper conductor pairs and an anti-crosstalk  divider, which improves pair isolation. CMR (Communications Multipurpose cable, Riser) cabling is flame-retardant and can be run vertically between floors in non-plenum areas. UniFi Cable is CMR fire-rated (also called riser-rated), making it suitable for in-wall and riser cabling applications.We recommend using Category 6 Ethernet connectors to optimize performance and accommodate the size of the 23 AWG conductors.

TOUGHCable PRO e eкраниран мрежов кабел от висок клас за предлагащ защита на мрежата от неблагоприятни фактори на околната среда. Кабелът е категория 5Е, за външен монтаж с дренажен проводник за отвеждане на нежланото индуцирано напрежение(ESD drain).

• 24 AWG copper conductor pairs - 4 усукани двойки от медни проводници с 0,511мм диаметър;

• 26 AWG integrated ESD drain wire to prevent ESD attacks and damage - дренажен проводник с диаметър 0,405мм за предотвратяване на ESD събития и повреди;

• PE outdoor-rated, weatherproof jacket - устойчива на атомсферни условия обвивка;

• Multi-layered shielding - Многослойна екранираща изолация.

СПЕЦИФИКАЦИЯ