Introducing RB1100AHx4, 13x Gigabit Ethernet ports Router, powered by Annapurna Alpine AL21400 CPU with four Cortex A15 cores, clocked at 1.4GHz each, for a maximum throughput of up to 7.5Gbit. The device supports IPsec hardware acceleration (up to 2.2Gbps with AES128).
Unit comes with 1U rackmount case, RS232 serial port and dual redundant power supplies (with -48v DC telecom power and 802.3at/af support).
All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
IPsec test results
RB1100x4
RB1100AHx4 IPsec throughput
Mode
Configuration
1400 byte
512 byte
64 byte
kpps
Mbps
kpps
Mbps
kpps
Mbps
Single tunnel
AES-128-CBC + SHA1
122.0
1366.4
124.9
511.6
127.0
65.0
256 tunnels
AES-128-CBC + SHA1
192.7
2158.2
200.5
821.2
203.4
104.1
256 tunnels
AES-128-CBC + SHA256
192.4
2154.9
200.5
821.2
203.4
104.1
256 tunnels
AES-256-CBC + SHA1
180.0
2016.0
188.2
770.9
190.3
97.4
256 tunnels
AES-256-CBC + SHA256
180.0
2016.0
188.2
770.9
190.3
97.4
256 tunnels
AES-128-GCM
192.7
2158.2
202.2
828.2
203.4
104.1
All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results