Търси

Захранващ Адаптер с Вграден ПоЕ инжектор 24V 1A, 100 Mbps

Very affordable and very popular 100Mbps passive 24V PoE injector MikroTik OEM HS24-2400 used to power most RouteBOARDs with PoE function. However, it can also be used to power other devices by supporting passive 24V PoE. The PoE injector supplies the device with free pairs of LAN cable 4,5 (+), 7,8 (-) and the total output power is 24W.

Захранващ Гиагабитов ПоЕ адаптер с изходно напрежение 24V 0,5A.

Защита срещу пренапрежение и ESD.

Съвместим с Ubiquiti airFiber, airMax и  Unifi PoE устройства.

СПЕЦИФИКАЦИЯ

Захранващ адаптер с вграден ПоЕ инжектор 24V 1A

   • Output Voltage: 24V
   • Max Output Current: 1A
   • Connector RJ45 LAN
   • Connector RJ45 PoE

DoC - Декларация за Съответствие

Certificate of Compliance
   

MikroTik OEM power adapter with standard 5.5 / 2.1mm connector designed to power, for example, PoE panels or MikroTik devices with input voltage 24V DC. The power adapter has a maximum power 48W / 96W and a maximum output current 2A / 4A. A power cord is also included with the power supply.

ML-DAC28+  25G SFP28 DAC cable, passive is a fast and cheap solution for easy connection of two network active switch/router elements at 1/10/25 Gbps without the need to purchase separate modules or other accessories (for example, optical patch cables). It goes without saying that multirate is supported, i.e. that in addition to SFP28 sockets it will be supported in both SFP and SFP+.

The quality twinax DAC cable comes with universal Cisco compatibility, which guarantees trouble-free use with most manufacturers of active elements. The DAC connecting cable is plugged directly into the SFP28 slot on the active element and immediately creates a connection at up to 25Gbps speeds. The connection using the DAC appears and behaves in the active element as a connection with classic SFP28 modules. Length 1m or 3m, passive design.

Моля изберете дължина от падащото меню.

WiFi ONU (2GE+2FE+WiFi) is an EPON ONU terminal designed specially for TriplePlay services.

Physical Gigabit ports LAN1 and LAN2 are designed for IPTV, VoIP, etc. Services. They are connected directly to PON chipset, and configuration is made on central OLT unit using CTC mechanizm. Those ports are mostly configured as ends of VLANs transmited through PON network.

„Second part” of ONU is designed to Internet access.

360 Degree Omnidirectional Antenna, 15dBi Gain for 3.1 - 3.8 GHz / WiMAX

MaxLink комплект от 2бр 1,25G SFP модули за оптична връзка до 3 км. Модулите са SingleMode с LC конектор и използват едно влакно. Поддържат DDM - цифрово диагностично наблюдение и са съвместими с всички продукти на MikroTik и с други маркирани като „Cisco съвместими“.

ML-S5531-3 е с Tx 1550 / Rx 1310nm 

ML-S3155-3 е с Tx 1310 / Rx 1550nm 

MaxLink комплект от 2бр 1,25G SFP модули за оптична връзка до 3 км. Модулите са SingleMode с SC конектори и използват едно влакно. Поддържат DDM - цифрово диагностично наблюдение и съвместими с всички продукти на MikroTik и с други маркирани като „Cisco съвместими“.

ML-S5531-3-SC е с Tx 1550 / Rx 1310nm 

ML-S3155-3-SC е с Tx 1310 / Rx 1550nm 

This McGill Microwave Systems 4dBi Tuned Antenna is optimized for high performance especially for the Helium Network. It offers higher coverage and increased HNT earnings thanks to its optimization.

The McGill Microwave Systems Antenna is optimized for the UK/EU Helium hotspots in the 868 frequency band. Often antennas are universal for more frequencies, but this results in suboptimal performance.

This antenna operates in the frequency range: 865 – 870 MHz UK/EU 865 UK & Europe, IN 865 India, RU 864 Russia. It has 4dBi gain and vertical polarization.

The antenna offers more than 7% improvement in transmitted power along with a 1.3:1 VSWR performance. It also results in reduced mis-matched loss when compared to many commercially available 2:1 VSWR performance. The antenna offers 58+/-1 degrees (4dBi) signal radiation footprint.

The McGill Microwave Systems Antenna uses N Type Male connector and it is made from fiberglass. It is 520mm high with 20mm in diameter. It weighs 0.8gh and it is rated for winds of up to 126km/h. It is RoHs Compliant and it also offers a mounting bracket, included in the box.

 

СПЕЦИФИКАЦИЯ