MaxLink

MaxLink 10G SFP+ Direct Attach Cable, passive is a fast and cheap solution for easily connecting two 1G or 10Gbps network switches/routers without the need for SFP/SFP+ modules or other accessories (for example optical patch cables).

The high quality Twinax DAC cable comes with universal Cisco compatibility to ensure trouble-free use with most active component manufacturers. DAC connects directly to the SFP/SFP+ slot on the active element and instantly connects up to 10Gbps. The DAC link appears to act as a connection to classical SFP/SFP+ modules. 

Length 0.2m, 0.5m, 1m, 2m, 3m, 5m - passive technology.

ML-S+31Dout-10 is a singlemode 10G SFP+ module with 1310nm wave length and 2 LC connectors for link at distance up to 10km. Module is "cisco compatible", so it is compatible with almost all active devices. The advantage of this product is higher frost resistance and its operating temperature is set deep under frost point to -40 to 70°C. The module is ideal for installation in outdoor microwave devices.

SFP+ set of two singlemode 10G SFP+ modules with 1 LC connector for link at distance up to 20km. Using 1 optical fiber, Tx/Rx wave length is 1330/1270nm and 1270/1330nm respectively. Modules are "cisco compatible", so compatible with almost all active devices including MikroTik CRS and CCR.

Very affordable and very popular 100Mbps passive 24V PoE injector MikroTik OEM HS24-2400 used to power most RouteBOARDs with PoE function. However, it can also be used to power other devices by supporting passive 24V PoE. The PoE injector supplies the device with free pairs of LAN cable 4,5 (+), 7,8 (-) and the total output power is 24W.

   • Output Voltage: 24V
   • Max Output Current: 1A
   • Connector RJ45 LAN
   • Connector RJ45 PoE

DoC

Certificate of Compliance

ML-DAC28+  25G SFP28 DAC cable, passive is a fast and cheap solution for easy connection of two network active switch/router elements at 1/10/25 Gbps without the need to purchase separate modules or other accessories (for example, optical patch cables). It goes without saying that multirate is supported, i.e. that in addition to SFP28 sockets it will be supported in both SFP and SFP+.

The quality twinax DAC cable comes with universal Cisco compatibility, which guarantees trouble-free use with most manufacturers of active elements. The DAC connecting cable is plugged directly into the SFP28 slot on the active element and immediately creates a connection at up to 25Gbps speeds. The connection using the DAC appears and behaves in the active element as a connection with classic SFP28 modules. Length 1m, 2m or 3, passive design.

WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products and with others marked as "Cisco compatible".

ML-S5531-3 - Tx 1550 / Rx 1310nm 

ML-S3155-3 - Tx 1310 / Rx 1550nm 

ML-DAC40G+1 is a 40G QSFP+ DAC cable, passive is a fast and inexpensive solution for easy connection of two network active switch / router elements at 40Gbps without the need to purchase separate modules and other accessories (such as optical patch cables).

The high-quality twinax DAC cable comes with universal Cisco compatibility, which guarantees trouble-free use with most active element manufacturers. The DAC interface cable plugs directly into the QSFP+ slot on the device, creating a connection speed of up to 40Gbps. The connection using a DAC in the device also appears as a connection with classic QSFP+ modules. Length 1 or 2m (choose from menu), passive technology.

Panel integrating 16 passive PoE injectors into a single 19"/1U panel suitable for powering up to sixteen devices. Professional solution for remote powering of many active elements with passive PoE support.

You will achieve a powering centrum by adding this pass-through panel into data cabinet that you can easily connect between the existing switch and the patch panel, which already leads to the powered device (IP camera, IP phone, wireless devices, etc.). Power connectors are in standard size 2.1/5.5 mm and both powering all 16 ports according to the selected input:

    - Mode A: Compatible with active components using 1,2 (-) and 3,6 (+) pins such as IP cameras, IP phones, wireless components, and other components using 802.3af/802.3at power adapters. All 4 pairs are for the data.

    - Mode B: Compatible with active components using 4,5 (-) and 7,8 (+) pins such as Ubiquiti networks, MikroTik and other. All 4 pairs are for the data. 

Attention: It is not possible to combine connection of Ubiquiti 100Mbps products requiring 24V power supply for example: NanoBeam, NSM5 with products requiring 48V power supply due to the different behaviour of Ubiquiti POE port powered by 24 V.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2 type and cable is terminated with two LC connectors on both sides. The total cable diameter is 2mm. Ferrule of connectors is made as UPC type. Cable cover/sleeve is LSZH (Low Smoke Zero Halogen). The length of the cable is 2m.

The Masterlan optical patch cord is suitable for connecting active and passive network elements (optical boxes, optical patch panels) or directly connecting of two active devices as switches or routers. Multimode 50/125um fibers are made from G.657.A2 type and cable is terminated with two SC and LC connectors. The total cable diameter is 2mm.

Ferrule of connectors is made as UPC type. Cable cover/sleeve is LSZH (Low Smoke Zero Halogen). The length of the cable is 3m.