5GHz Bridge
Compact, wireless point-to-point high-band bridge with a 1.2+ Gbps throughput rate.
Revolutionary Wireless Technology.
Introducing airFiber®, a truly revolutionary Point-to-Point wireless platform from Ubiquiti. Housed in a compact, highly efficient form factor, airFiber delivers amazing wireless gigabit+ performance, low latency, and long range. airFiber ushers in a new era in price-disruptive wireless technology ideal for carrier backhaul, building-to-building enterprise use, or public safety applications. Supports high-band 5 GHz frequencies.
Note. Price shown is for a single unit. airFiber® is normally purchased in pairs to form a single link.
LHG XL 5 ac - RBLHGG-5acD-XL
The LHG XL 5 ac is Long Range 5GHz 802.11ac wireless device with an integrated dual polarization 27 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.
The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.
- LHG XL 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
LHG XL HP5 -RBLHG-5HPnD-XL - MikroTik Integrated Antenna
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
MikroTik LHG 5 XL ax - LHG-5axD-XL
The LHG XL 5 ax is a lightweight wireless device with Wi-Fi 6 support for the 5 GHz band, featuring an integrated 27 dBi high-gain grid antenna that ensures excellent wind resistance. It is ideal for point-to-point links or as a client unit for long-distance connections. The unit is equipped with a Gigabit Ethernet port that supports passive PoE power supply in the range of 12–28 V.
The 802.11ax standard brings crucial improvements for long-distance wireless links – including better spectral efficiency, higher modulation rates (1024-QAM), and lower latency. That means stronger performance even in noisy environments and faster, more stable connections over a greater distance. Combined with WPA3 encryption and RouterOS v7, the LHG ax series is ready for the challenges of modern outdoor networking.
MikroTik NetBox 5 ax - L11UG-5HaxD-NB
NetBox 5 ax is a powerful dual-chain outdoor device that can fill multiple roles in your setups: AP/CPE/Point-to-point. The strong 5 GHz Wi-Fi 6 radio comes with handy SMA connectors. That means you can add a HGO-antenna-OUT and you’ve got yourself an excellent omnidirectional AP… or try the mANT30 PA antenna to create a powerful long-range point-to-point link!
This weatherproof board features a modern Qualcomm Maple CPU based on the ARM architecture, 256 MB of RAM, a USB port for extra storage or other needs, and a Gigabit Ethernet port with PoE-in.
We’ve designed the case to make a sysadmins life easier. You can open the case effortlessly with just one hand. At the bottom, concealed behind a protective door, you’ll find exits for Ethernet. Equipped with a mounting loop for easy tower/pole installation, it also offers a separate DIN rail mount.
If you’ve read this far, here’s a little bonus feature: we’ve kept the good old beeper for various alarms or creative outputs.
MikroTik NetMetal ax - L23UGSR-5HaxD2HaxD-NM
NetMetal ax - a powerful dual-band, dual-chain Wi-Fi 6 radio offers increased speed, stability, security, roaming, power management, and other features, compared to the previous wireless protocols. Two RP-SMA connectors allow adding an antenna of your choice for distances up to 30 kilometers.*. If necessary, you can adapt the NetMetal ax for lower range use with such antennas as our HGO-antenna-OUT screw-on omni antenna unit. It provides 3.3 dBi gain for the 2.4 GHz band and 5.5-7.1 dBi gain for the 5 GHz band.
It features a modern dual-core ARM CPU, Gigabit Ethernet and 2.5 Gigabit SFP for fiber connectivity, a USB port, and a free miniPCIe slot that allows further customization. You could, for example, add an LTE modem for a mobile internet backup – we’ve added a NanoSIM slot on the NetMetal! But there are other options, like adding a gateway for LoRa IoT setups, such as our R11e-LR8!
*It’s important to note that while longer links are feasible, their reliability may vary. Additionally, the distance achievable greatly depends on the antenna selected for use.
Mimosa B5X
Mimosa B5x is an outdoor PTP unit in a robust chassis with high resistance to interference, IP67 protection with an integrated antenna with 8dBi gain. Possibility of mounting a directional antenna from a wide range (12 to 25 dBi), support for Wi-Fi 5 OFDM technology. The unit has a 4×4 MIMO radio part with a modulation speed of 1700 Mbps at 160 MHz and is able to operate in the frequency band 4900 to 6400 MHz. For network connection, the B5x unit has one Gigabit Ethernet with passive 48V PoE support.
- Wireless Protocol - Fixed TDMA and TDMA-FD with adjustable download/upload ratio 75:25 / 67:33 / 50:50
- Supports 6 GHz channels - 4 900 to 6 400 MHz
- Durable aluminum chassis, protection IP67, operating temperature -40 to +55 °C
- PTP installation only support
- 4×4 MIMO, 1 700 Mbps, 256 QAM, 160 MHz (2 x 80 MHz)
- High output power 30 dBm
- GPS time synchronization
- Power over 48V passive PoE
- DATA SHEET
- Mimosa Design Tool
Mimosa B6x 5.15-6.4GHz 3.4Gbps PtP Backhaul
B6x is ultra-fast 3.4 Gbps PTP backhaul delivers reliable, medium-range connectivity using the unlicensed 5.15-6.425 GHz spectrum with a modular design for ultimate flexibility. The unit can be connected to N5-X twist on compatible antennas (antenna not included). It has the new Wi-Fi 6E technology with OFDMA. With access to the 6 GHz band, the B6x achieves extremely low latency (1ms) with speeds up to 3.14 Gbps. The transmit power is 24 dBm. The advantage is also higher reliability due to new anti-noise features. High resistance is guaranteed by IP67 certification.
Mimosa C5C, 2x RSMA f connectors
C5c has been designed specifically to handle long-range backhaul (PTP), point-to-multipoint (PTMP) GigaPoP links, and PTMP MicroPoP links impaired by vegetation. Connectorized by design, the C5c mates with many popular antennas, delivering 500+ Mbps of TCP throughput.
Mimosa C5X
The Mimosa C5x is the industry’s most versatile, integrated radio with four modular twist-on antenna options. The ultra-rugged solution provides extended frequency operation from 4.9–6.4 GHz, with best-in-class noise immunity. Delivering the ultimate in flexibility and cost efficiency, the C5x is the go-to PTP or PTMP solution for 5 GHz deployments — speeds of up to 700 Mbps in PTMP or PTP mode.
Encased in metal and leveraging custom-designed horn and Cassegrain antennas, the C5x reduces localized noise and provides immunity from interference with breakthrough front-to-back and front-to-side performance. Each antenna in the N5-X family is optimized to isolate noise with incredible sidelobe rejection. To escape the noise, the C5x lets you take advantage of both 4.9 GHz public safety applications and licensed frequencies up to 6.4 GHz, where allowed by local regulations. The custom-designed X-series modular antennas are specifically optimized for C5x extended frequency support.
