Currency
BGN
  • EUR
  • BGN
Language
Menu
Profile
Language
Home MikroTik WIreless for Home and Office RB4011iGS+5HacQ2HnD-IN - MikroTik WiFi 10xGigabit port router, Quad-core CPU, 1GB RAM, SFP+, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac

RB4011iGS+5HacQ2HnD-IN - MikroTik WiFi 10xGigabit port router, Quad-core CPU, 1GB RAM, SFP+, dual band 2.4GHz / 5GHz 4x4 MIMO 802.11a/b/g/n/ac

Price excl. tax: 430.00BGN.
Price inc. tax: 516.00BGN.
  • Code:
    RB4011iGS+5HacQ2HnD-IN
  • Weight:
    0.500 Kgs

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!

The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.

RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.

Data Sheet RB4011iGS+5HacQ2HnD-IN

Quick Guide RB4011

Add to wishlist

Quick Buy

Just 2 fields to fill in
We will contact you to finalize the order
Product code RB4011iGS+5HacQ2HnD-IN
Architecture ARM 32bit
CPU AL21400
CPU core count 4
CPU nominal frequency 1.4 GHz
Dimensions 228 x 120 x 30 mm
License level 5
Operating System RouterOS
Size of RAM 1 GB
Storage size 512 MB
Storage type NAND
Tested ambient temperature -40°C to 45°C
Suggested price $249.00

POWERING

PoE in Passive PoE
PoE out Passive PoE up to 57V
PoE in input Voltage 18-57 V
Number of DC inputs 2 (DC jack, PoE-IN)
DC jack input Voltage 12-57 V
Max out per port output (input > 30 V) 420 mA
Max out per port output (input < 30 V) 600 mA
Max total out (A) 600 mA
Max power consumption 44 W
Max power consumption without attachments 23 W

WIRELESS

Wireless 5 GHz number of chains 4
Wireless 5 GHz standards 802.11ac MU-MIMO
Antenna gain dBi for 5 GHz 3
Wireless 5 GHz chip model R11e-2HnD
Wireless 2.4 GHz number of chains 2
Wireless 2.4 GHz standards 802.11b/g/n
Antenna gain dBi for 2.4 GHz 3
Wireless 2.4 GHz chip model R11e-2HnD

ETHERNET

10/100/1000 Ethernet ports 10

FIBER

SFP+ ports 1

PERIPHERALS

MiniPCI-e slots 1
Serial port RJ45

OTHER

PCB temperature monitor Yes
Voltage Monitor Yes

Wireless Specifications

5 GHz Transmit (dBm) Receive Sensitivity
6MBit/s 33 -96
54MBit/s 29 -81
MCS0 33 -96
MCS7 28 -77
MCS9 26 -72

ETHERNET TEST RESULTS

RB4011iGS+5HacQ2HnD-IN AL21400 1G/S+ all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 806,4 9,792.9 2312,9 9,473.6 5509,7 2,821.0
Bridging 25 bridge filter rules 806,4 9,792.9 1037,4 4,249.2 1153,2 590.4
Routing none (fast path) 806,4 9,792.9 1923,3 7,877.8 5092,3 2,607.3
Routing 25 simple queues 806,4 9,792.9 1046,6 4,286.9 960,3 491.7
Routing 25 ip filter rules 593,7 7,209.9 625,2 2,560.8 564,6 289.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
 

IPsec TEST RESULTS

RB4011iGS+5HacQ2HnD-IN AL21400 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 140.8 1577.0 141.2 578.4 139.9 71.6
256 tunnels AES-128-CBC + SHA1 192.7 2158.2 200.5 821.2 203.4 104.1
256 tunnels AES-128-CBC + SHA256 192.4 2154.9 200.5 821.2 203.4 104.1
256 tunnels AES-256-CBC + SHA1 180.0 2016.0  
FileInfo
RB4011-IN-180919132356 [PDF, 1.72 MB]
1539673846RB4011-iGS [PDF, 182.05 KB]

New Products

Bestsellers

News