- Weight:0.300 Kgs
iUAP-AC-LR is a gigabit dual-band IEEE 802.11ac ceiling access point, offering a concurrent data rate as high as 1317 Mbps. Powered by MU-MIMO technology, a single iUAP-AC-LR can simultaneously communicate with multiple clients, greatly improving throughput and enhancing user experience. The built-in omni-directional antennas optimize signal radiating directions and broaden the wireless coverage of a single AP. iUAP-AC-LR can be powered by PoE sourcing equipment that compliant with IEEE 802.3at. With ceiling installation design and sleek appearance, iUAP-AC-LR simplifies wireless networking for enterprises, hotels and other public indoor spaces.
Up to 1317 Mbps dual-band data rate and the Gigabit Ethernet port offer you ultra-fast internet connections.
Compliant with IEEE 802.11ac Wave2 and powered by MU-MIMO technology, a single iUAP-AC-LR can communicate with multiple wireless clients at one time, letting you enjoy higher throughput and better experience.
iUAP-AC-LR allows clients supporting either 2.4 GHz or 5 GHz band, or both to connect to it at the same time, tripling the quantity of connected clients of traditional single-band AP.
Featuring various anti-interference algorithms, the built-in RF enables iUAP-AC-LR to evenly allocate bandwidth resources for multiple users, filter interference, and optimize data rate, offering you a guaranteed signal strength and reliable wireless experience.
iUAP-AC-LR allows you to set multiple SSIDs and add VLAN tags for SSIDs, thus protecting your network.
You can use an IEEE 802.3at-compliant PoE sourcing equipment, or a 24V DC power adapter to power on iUAP-AC-LR.
The ProFi Controller makes it easy to manage and monitor the whole ProFi devices in a real-time manner and cloud services enable a remote and secure access free from the restrictions of device location.
|Frequency band||2.4 GHz, 5 GHz|
|Wireless standards||IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac|
|2.4 GHz data rate||1 - 450 Mbps|
|5 GHz data rate||6 - 867 Mbps|
|Ethernet port||1*10/100/1000 Base-TX port|
|Max. power consumption||13.5W (Full-load)|
|Power supply standard||IEEE 802.3at & 24V, 0.5A Passive PoE|
|Antenna gain||3*4 dBi|
|2.4 GHz Max. output power||29 +/- 1.5 dBm|
|5 GHz Max. output power||26 +/- 1.5 dBm|
|802.11b RX sensitivity||-94 dBm|
|2.4 GHz 802.11n (MCS7) RX sensitivity||-73 dBm|
|5 GHz 802.11a RX sensitivity||-93 dBm|
|5 GHz 802.11n (MCS7) RX sensitivity||-74 dBm|
|Operating modes||AP, Client+AP|
|Max. No. of SSID||2.4 GHz: 8
5 GHz: 4
|Max. connected clients||2.4 GHz: 128
5 GHz: 256
|Access control||MAC address-based|
|Adjustable power transmit||Supported|
|Connected clients control||Supported|
|Transmission Power||Adjustable by 1 dBm|
|VLAN tagging for SSID||Supported|
|LED indicator control||Supported|
|Diagnostics tool||Ping, Traceroute|
|Reboot at specified interval||Supported|
|Firmware upgrade||Local and AC upgrade|
|Reboot||Local and AC reboot|
|Reset||Local and AC reset|
|Default login IP address||192.168.0.254|
|Default user name||admin|
|Operating temperature||-10℃ - 45℃|
|Operating humidity||(10% - 90%) RH, non-condensing|
|Storage temperature||-30℃ - 70℃|
|Storage humidity||(10% - 90%) RH, non-condensing|
|iUAP-AC-LR_Datasheet||[PDF, 888.52 KB]|