Ubiquiti Networks

Improved wind load performance and advanced RF energy isolation in a sleek integrated design.

Use the IsoBeam with any of these dish antennas: airFiber AF‑5G30‑S45, PowerBeam PBE‑5AC‑620, PowerBeam PBE‑M5‑620, and RocketDish RD‑5G30‑LW. Installation is quick and easy – requiring just a single screw.

VIDEO

LTU-Lite is a PtMP CPE unit for the 5GHz band with 13dBi antenna gain and proprietary LTU wireless technology that is not based on the 802.11 standard protocol can deliver real TCP/IP speeds 600Mbps+ (up to 1Gbps+ with future fw), modulation up to 1025 QAM (up to 4096 QAM with future fw) and higher spectral efficiency 21.2 bps/Hz, twice the 802.11AC standard!

DATA SHEET

FIRMWARE

Electrostatic discharge (ESD) is the leading cause for outdoor device failures. You can effectively protect against ESD damage using a grounded Ubiquiti PoE Adapter, TOUGHCableTM, and TOUGHCable Connectors.

• • Surge protection
  • Clamping protection
  • Maximum surge discharge
  • Peak pulse current
  • AC cable with earth ground
  • DATASHEET

Ubiquiti U7 Outdoor is a new outdoor dual-band unit supporting Wi-Fi 7. It operates in the 2.4 GHz band at a speed of 688 Mb/s and in the 5 GHz band at a speed of 4.3 Gb/s. Two external antennas can be added to the unit using RP-SMA connectors on the top. For network connection, a LAN port with a speed of up to 2.5 Gb/s is available. The access point is powered via PoE+. The access point offers wide mounting options for the wall and pole, and the mounting accessories are included in the package.

• Zero Handoff Roaming - seamless transition between access points
• Wireless uplink (ideal for locations where a data cable cannot be run)
• Up to 8 SSIDs
• Detailed traffic statistics
• Guest network
• Voucher system
• Load balancing - maintaining balanced client distribution
• Bandwidth limiting for each SSID

DATA SHEET

UACC-CM-RJ45-MG is a universal 10-Gigabit SFP+ metal module from Ubiquiti Networks with RJ45 connector for metal cable with data rate option 1G / 2.5G / 5G and 10 Gbps. The range of the module is up to 100 meters when using a Cat.6A cable, even at a speed of 10 Gbps. Max. module consumption is 1.9W.

DATASHEET

This 5 GHz wireless bridge allows for point-to-point 5+ km connection to another Bridge Pro device or seamless uplink using the UniFi Wi-Fi Auto-Link feature. It has two GbE RJ-45 ports, one of which supports PoE output for powering additional PoE devices. The device is powered via PoE/PoE+ and is designed for outdoor installations with resistance to weather conditions (IPX6). 

Note. Cannot be set up standalone and must be managed by a UniFi Console, Official UniFi Hosting, or a Self-Hosted UniFi Network Server.
For the longest range, uplink to another UDB Pro or UDB Pro Sector is recommended.
PoE adapter included. PoE+ input required for PoE passthrough.

INSTALLATION GUIDE