Ubiquiti Networks

UVC-G5-Turret-Ultra is the 5th generation camera from the UniFi Video series. It has a 1/2.4" CMOS sensor with 4MP resolution (2688 x 1512 px, 16:9) @ 30 FPS. The fixed lens has a viewing angle of 102.4° horizontally, 54.9° vertically and 120.6° diagonally. The camera is equipped with microphone (can be disabled) and (1) 10/100Mbps Ethernet port through which the camera is powered using POE 802.3af or passive POE with input voltage 37 - 57 V DC. For night mode, the camera is equipped with an IR illuminator with a range of 30 m. Maximum power consumption is only 4 W!

The Wave Access Point Micro is a 60GHz point-to-multipoint (PtMP) transmitter unit with built-in 5 GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 6km against the Wave LR or 4km against the smaller Wave Nano unit and is ideal for ISPs. The very discreet device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP app, a 2.5 Gigabit LAN port with support for power via PoE - 24 and 48V DC. The device only supports bridge mode and supports both 1080 and 2160 MHz channel width in the 60GHz spectrum. The maximum throughput indicated by the manufacturer at 16 QAM is 5 Gbps (2.5 Gbps full duplex).

Max. total throughput: 5 Gbps (2.5 Gbps duplex)

90° sector coverage

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) 2.5 GbE WAN port

31 client capacity:
— Wave Pro (6 km link range)
— Wave Long-Range (6 km link range)
— Wave Nano (4 km link range)
— Wave Pico (0.9 km link range)

Integrated GPS & Bluetooth

DATA SHEET

Wave Long Range is a 60GHz point-to-multipoint (PtMP) client device with built-in 5GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 8 km and is ideal for ISPs. The very compact and durable device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP mobile application and a Gigabit LAN port with PoE support . The device supports both bridge and NAT mode and supports 1080 and 2160 MHz channel width in the 60GHz spectrum. The maximum bandwidth indicated by the manufacturer at 16 QAM is 2 Gbps (1 Gbps full duplex).

• Compact dimensions - 424 × 424 × 166 mm
• 60GHz spectrum with low interference - 57 to 71 GHz
• Range up to 8 km - depends on the regulation in the country used
• 2Gbps Throughput (1 Gbps FD)
• Supports half channel width to achieve longer distance or better availability in bad weather
• Supported channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz- depends on place of use
• Gigabit LAN port with passive PoE support (24 or 48 V DC)
• Built-in GPS
• Settings via web management and bluetooth - UISP mobile application
• Installation Guide

Wave-Nano is a 60 GHz point-to-multipoint (PtMP) client device with built-in 5 GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 5 km+ and is ideal for ISPs. The very compact and durable device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP mobile application and a Gigabit LAN port with PoE support. The device supports both bridge and NAT mode and supports 1080 and 2160MHz channel width in the 60GHz spectrum. The maximum bandwidth indicated by the manufacturer at 16 QAM is 2 Gbps (1 Gbps full duplex).

• Compact dimensions - 257 × 257 × 114 mm
• 60GHz spectrum with low interference - 57 to 71 GHz
• Range up to 5 km+ - depends on the regulation in the country used
• 2Gbps Throughput (1 Gbps FD)
• Supports half channel width to achieve longer distance or better availability in bad weather
• Supported channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69200, 70200 MHz- depends on the place of use
• Gigabit LAN port with passive PoE support (24 or 48V DC)
• Built-in GPS
• Settings via web management and bluetooth - UISP mobile application 

DATA SHEET

Wave-Pico is a 60 GHz PtMP client device with built-in 5GHz Wifi 6 (802.11ax) backup radio. Max link range when used with Wave-AP is 1.3 km or 0.9 km when used with Wave-AP-micro. The throughput of the device is 2 Gbps(1 Gbps duplex) and 5 GHz backup can reach up to 800 Mbps. Unit is euiped with 1 Gbps LAN port with PoE 48V DC support. To simplify setup, the device is equipped with integrated Bluetooth to connect to the UISP mobile app or there is an option to setup via web interface.

Max. link range:
— Wave AP: 1.3 km
— Wave AP Micro: 0.9 km

Max. total throughput: 2 Gbps (1.5 Gbps duplex)

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) GbE RJ45 port

Integrated Bluetooth

High-capacity 60 GHz radio that supports long-distance PtP (bridge) and PtMP links. The Ubiquiti Wave-Pro is a 60 GHz outdoor unit designed for Point-to-Multipoint (PtMP) connections with Wave (PtP) technology. It is possible to connect a Wave AP. The device has 2 LAN ports with a speed of 2.5 Gbps and one SFP+ port with a speed of up to 10 Gbps.

Range and Key Features

• In PtMP mode up to *8 km.
• In PtP mode up to *15 km.
• 60 Ghz
• SFP+ port
• Mods: PtMP,PtP
• Compatible with Wave AP

DATA SHEET

Ubiquiti Networks introduces UniFi® Category 6 Indoor Ethernet Cable for your high-speed UniFi and general indoor network deployments.Available in lengths of 1000 ft (304 m), UniFi Cable is Category 6 UTP (Unshielded Twisted Pair) cabling that supports speeds of up to 10G Ethernet. It uses 23 AWG solid copper conductor pairs and an anti-crosstalk  divider, which improves pair isolation. CMR (Communications Multipurpose cable, Riser) cabling is flame-retardant and can be run vertically between floors in non-plenum areas. UniFi Cable is CMR fire-rated (also called riser-rated), making it suitable for in-wall and riser cabling applications.We recommend using Category 6 Ethernet connectors to optimize performance and accommodate the size of the 23 AWG conductors.

DATA SHEET