EdgeMAX

• (24) Gigabit RJ45 Ports + (2) SFP Ports 

• (1) Serial Console Port 

• Non-Blocking Throughput: 26 Gbps 

• Switching Capacity: 52 Gbps 

• Forwarding Rate: 38.69 Mpps 

• Maximum Power Consumption: 25W 

• Rack- or Wall-Mountable 

• Quiet, Fanless Operation 

• DC Input Option (Redundant or Stand-Alone)

 

The EdgeSwitch Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.

The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.

ES-48-Lite - Managed Gigabit Switch with SFP 48 RJ45 Gigabit ports, the EdgeSwitch® Lite delivers robust performance and intelligent switching for growing networks.

The EdgeSwitch® Lite simultaneously processes traffic on all ports at line rate without any packet loss. Total non-blocking throughput up to 70 Gbps.

The ES-48-Lite supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability. For high-capacity uplinks, each 48-port model includes two SFP+ ports for uplinks of up to 10 Gbps.

The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.

ES-8-150W is a gigabit switch with (8) RJ45 ports, (2) SFP ports, and a 150W power supply. The EdgeSwitch is a fully managed, PoE+ Gigabit switch, delivering robust performance and intelligent switching for growing networks.

• (8) Gigabit RJ45 Ports
• (2) SFP Ports
• (1) Serial Console Port
• Non-Blocking Throughput: 10 Gbps
• Switching Capacity: 20 Gbps
• Forwarding Rate: 14.88 Mpps
• Maximum Power Consumption: 150W
• Supports POE+ IEEE 802.3at/af and 24V Passive PoE
• Wallmountable with Mount Brackets (Included)
• Desktop-Mountable (Do not physically stack the ES-8-150W.)
• DC Input Option (Redundant or Stand-Alone)
• DATASHEET
• QSG

Introducing the Ethernet Surge Protector Gen.2, model ETH-SP-G2, from Ubiquiti Networks. The ETH-SP-G2 is a cost-effective solution for protecting outdoor Ethernet devices from damaging electrostatic discharge and surges. Since all Ubiquiti® airMAX® devices already have robust ESD protection built in, adding the ETH-SP-G2 to the installation provides an additional layer of protection to the network. 

The ETH-SP-G2 is engineered to protect Power‑over‑Ethernet (PoE) or non-PoE devices with connection speeds of up to 1 Gbps. Two passive, surge-protected RJ45 connections provide maximum equipment compatibility. 

DATASHEET

QSG

The NanoSwitch is an outdoor 4-port Gigabit switch with PoE passthrough.

Simply providing 24V 2-pair input makes NanoSwitch an outdoor 4-port unmanaged switch with "always on" 24V 2-pair output on three ports.

PoE In — RJ45 port supports 10/100/1000 Ethernet connections, and supports passive 24V, 2-pair PoE to power the switch.

PoE Out — RJ45 ports support 10/100/1000 Ethernet connections, and the three passive 24V, 2-pair PoE ports provide up to 24W PoE output.

The NanoSwitch features an outdoor weatherproof form factor. Operating Temperature: -30 to 70° C (-22 to 158° F)

Specifically designed for use with Ubiquiti TOUGHCables and available in 100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.

Specifically designed for use with Ubiquiti TOUGHCables and available in 100-pc. bags, TOUGHCable Connectors protect against ESD attacks and Ethernet hardware damage while allowing rapid field deployment without soldering.

By using a grounded Ubiquiti Power over Ethernet (PoE) Adapter along with Ubiquiti TOUGHCable and TOUGHCable Connectors, you can effectively protect against ESD attacks.

Compact adapter capable of delivering 15W of PoE to 802.3af devices.

The 802.3af PoE Injector (U PoE AF) is designed to power 802.3af PoE devices. The U PoE AF delivers up to 15W of PoE that can be used to power the Access Point U6 Lite and other 802.3af devices. It can also provide enhanced protection against electrostatic discharge (ESD).

Features:

• • Delivers up to 15W of 802.3af PoE
  • Compatible with all 802.3af PoE devices
  • Surge, peak pulse, and overcurrent protection
  • AC cable with earth ground
  • Dynamic LED light that indicates device and current status
  • Compatible with TOUGHCable
  •  
  • DATA SHEET

Ubiquiti Networks introduces UniFi® Category 6 Indoor Ethernet Cable for your high-speed UniFi and general indoor network deployments.Available in lengths of 1000 ft (304 m), UniFi Cable is Category 6 UTP (Unshielded Twisted Pair) cabling that supports speeds of up to 10G Ethernet. It uses 23 AWG solid copper conductor pairs and an anti-crosstalk  divider, which improves pair isolation. CMR (Communications Multipurpose cable, Riser) cabling is flame-retardant and can be run vertically between floors in non-plenum areas. UniFi Cable is CMR fire-rated (also called riser-rated), making it suitable for in-wall and riser cabling applications.We recommend using Category 6 Ethernet connectors to optimize performance and accommodate the size of the 23 AWG conductors.