UniFi OS Consoles, Controllers and Gateways

With this adapter, you can power the Raspberry PI as well as other single-board computers and other devices powered by a USB type C connector. Thanks to this, you can use these devices very flexibly and we do not need any socket or mains adapter.

With this adapter, it is possible to power a device with a USB-C input connector thanks to 802.3af PoE on the LAN cable. Of course, it is not necessary to use the RJ45 output and you can also charge ordinary electronics, such as phones and tablets with USB-C using Ethernet PoE 802.3af

A fully-featured UniFi OS Console with an integrated security gateway, WiFi 6 access point and ports supporting PoE output.

Capable of hosting the entire UniFi application suite*, the Dream Router offers a complete UniFi solution particularly ideal for home users.

     5 GHz WiFi band with a 2.4 Gbps throughput rate

• • 2.4 GHz WiFi band with a 600 Mbps throughput rate
  • (1) GbE RJ45 WAN port**
  • (4) LAN ports, including (2) PoE outputs
  • 128 GB of internal storage and a Micro SD memory card expansion slot***
  • *Two applications can be run simultaneously. Maximum cameras are limited, see the Resource Calculator.
    **Internet speeds up to 700 Mbps.
    ***Micro SD card must have at least 128 GB of storage.
  • DATA SHEET
  • INSTALL GUIDE

Compact, desktop UniFi OS Console with a pre-installed 1TB hard drive (HDD).

Features:

• • Pre-installed with UniFi Network and Protect
  • Powered via PoE or QC 2.0 USB-C
  • (1) 2.5" HDD bay with a pre-installed 1TB HDD

DATA SHEET

All-in-one enterprise security gateway & network appliance for small to medium-sized businesses. The optimal experience for larger networks. UniFi Dream Machine Pro (UDM-Pro) is an all-in-one enterprise network appliance.

UDM-Pro integrates all current and upcoming UniFi controllers with a security gateway, routing, 10 Gbps SFP+ WAN, application visibility, VPN services, and 3.5 Gbps full threat management throughput into a single device.

Managed switch - Fully managed switch with 10 Gbps SFP+ downlink and eight RJ45 GbE ports for scaling up.

Unifi Network - Integrated network management system for all network elements with an easy-to-use and modern user interface. Wi-Fi AI automatically optimizes the Wi-Fi network.

UniFi Protect - Professional-grade video surveillance system and NVR with integrated 3.5"/2.5" HDD bay for scalable storage.

DATA SHEET

QSG

All-in-one, enterprise-grade UniFi OS Console and security gateway designed to host the full UniFi application suite. 

These enable control of WiFi, Security Cameras, Phone Systems, and Door Access.

Features:

• • Integrated 8-port PoE Switch
  • 128 GB of integrated storage
  • LAN ports: (8) GbE RJ45, (1) 10G SFP+
  • WAN ports: (1) 2.5GbE RJ45, (1) 10G SFP+
  • Threat management and traffic/client identification
  • (1) 3.5" HDD bay for storing UniFi Protect recordings
  • DATA SHEET

Raspberry Pi 3B + UniFi Controller is a compact device with pre-installed UniFi Controller with the possibility of remote management of all Unifi AP units based on the very high-quality HW platform Raspberry Pi 3B+ with enough power to manage up to 40 devices (UniFi AP, UniFi Switch, USG), which is almost 2× the power compared to the standard UC-CK device from Ubiquiti Networks. Thanks to this device, you no longer have to install UniFi Controller on desktop PCs or servers with much higher power consumption.

Easy installation - Installation of Raspberry Pi 3B+ UniFi Controller (so-called raspberries) is very simple - just connect to the network with an Ethernet cable, connect the power supply, wait for booting (takes about 2 minutes) and using a web browser, simply enter the IP address that your raspberry received from the dhcp server, or the fallback address 192.168.1.30.

DATA SHEET

USER MANUAL

Raspberry Pi 4B UniFi Controller is a compact device with pre-installed UniFi Controller v8 with the possibility of remote management of all Unifi AP units based on the very high-quality HW platform Raspberry Pi 4B with enough power to manage up to 50 devices (UniFi AP, UniFi Switch, USG). Thanks to this device, you no longer have to install UniFi Controller on desktop PCs or servers with much higher power consumption. Powering option is SBC-PoE-Power-C.

• Pre-installed UniFi Controller - performance to manage UP to 50 DEVICES
• 1.8 GHz 64-bit quad-core ARM v8 Cortex-A72 CPU, 2 GB RAM
• 2× USB 2.0 ports
• 2× USB 3.0 ports
• MicroSDHC slot
• Gigabit Ethernet port
• Maximum power consumption 7.5 W - power supply via microUSB (5 V/ 2 A)
• Quiet operation without a fan
• Installation of Raspberry Pi 4B UniFi Controller (so-called raspberry) is very simple - just connect to the network with an Ethernet cable, connect the power supply, wait for booting (takes about 2 minutes) and using a web browser, simply enter the IP address that your raspberry received from the dhcp server, or the fallback address 192.168.1.30.

DATASHEET

UXG-Max is a versatile device. It has (4) LAN 1/2.5 Gbps ports and (1) WAN 2.5 Gbps port. The gateway also supports IDS/IPS with routing speeds up to 1.5 Gbps. For better your privacy and security on the internet, it supports VPN from WireGuard, L2TP, and OpenVPN. The device is suitable for small to medium-sized businesses. The gateway is powered through USB-C.

Managed with a CloudKey, Official UniFi Hosting, or UniFi Network Server

Up to 1.5 Gbps routing with IDS/IPS

(1) 2.5 GbE WAN port

(4) 2.5 GbE LAN ports, including (1) remappable to WAN

USB-C powered (adapter included)

DATA SHEET

INSTALLATION GUIDE