Ubiquiti Networks

The durable UniFi outdoor patch cable is designed to work in the harshest conditions. The cable is Cat.5e class with a length of 1m/2m/3m, shielding type STP, has an internal foil shielding, and a built-in ESD drain wire—all encased in a weatherproof, insulating white or black jacket and is terminated with shielded RJ45 connectors on both sides.

DATASHEET

Ubiquiti Networks UOC-3 optical patch cord is suitable for connecting active and passive optical elements. Cable is made as multimode with 50/125 (OM3) fibers, 2mm diameter, 3m length and LC-LC duplex connectors.

The Ubiquiti Doorbell Lite is a compact UniFi Protect video doorbell featuring a 5MP camera, 95.8° field of view, IR illumination for night vision up to 5m, a weather-resistant enclosure, built-in microphone and speaker for two-way audio communication. Power and network connectivity are provided via (1) 10/100Mbps PoE-In port for connection to a UniFi Protect system.

• 5MP 24fps video (1920 x 2560 px)
• IR night vision up to 5m
• IPX5 weather-resistant housing
• Two-way audio with noise cancellation
• Powered via 37-57V PoE

DATA SHEET

INSTALLATION GUIDE

UVC-G5-Turret-Ultra is the 5th generation camera from the UniFi Video series. It has a 1/2.4" CMOS sensor with 4MP resolution (2688 x 1512 px, 16:9) @ 30 FPS. The fixed lens has a viewing angle of 102.4° horizontally, 54.9° vertically and 120.6° diagonally. The camera is equipped with microphone (can be disabled) and (1) 10/100Mbps Ethernet port through which the camera is powered using POE 802.3af or passive POE with input voltage 37 - 57 V DC. For night mode, the camera is equipped with an IR illuminator with a range of 30 m. Maximum power consumption is only 4 W!

DATA SHEET

INSTALLATION GUIDE

The Wave Access Point Micro is a 60GHz point-to-multipoint (PtMP) transmitter unit with built-in 5 GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 6km against the Wave LR or 4km against the smaller Wave Nano unit and is ideal for ISPs. The very discreet device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP app, a 2.5 Gigabit LAN port with support for power via PoE - 24 and 48V DC. The device only supports bridge mode and supports both 1080 and 2160 MHz channel width in the 60GHz spectrum. The maximum throughput indicated by the manufacturer at 16 QAM is 5 Gbps (2.5 Gbps full duplex).

Max. total throughput: 5 Gbps (2.5 Gbps duplex)

90° sector coverage

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) 2.5 GbE WAN port

31 client capacity:
— Wave Pro (6 km link range)
— Wave Long-Range (6 km link range)
— Wave Nano (4 km link range)
— Wave Pico (0.9 km link range)

Integrated GPS & Bluetooth

DATA SHEET

Wave Long Range is a 60GHz point-to-multipoint (PtMP) client device with built-in 5GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 8 km and is ideal for ISPs. The very compact and durable device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP mobile application and a Gigabit LAN port with PoE support . The device supports both bridge and NAT mode and supports 1080 and 2160 MHz channel width in the 60GHz spectrum. The maximum bandwidth indicated by the manufacturer at 16 QAM is 2 Gbps (1 Gbps full duplex).

• Compact dimensions - 424 × 424 × 166 mm
• 60GHz spectrum with low interference - 57 to 71 GHz
• Range up to 8 km - depends on the regulation in the country used
• 2Gbps Throughput (1 Gbps FD)
• Supports half channel width to achieve longer distance or better availability in bad weather
• Supported channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz- depends on place of use
• Gigabit LAN port with passive PoE support (24 or 48 V DC)
• Built-in GPS
• Settings via web management and bluetooth - UISP mobile application
• Installation Guide

Wave-Nano is a 60 GHz point-to-multipoint (PtMP) client device with built-in 5 GHz backup (WiFi 6 - 802.11ax) from Ubiquiti with a range up to 5 km+ and is ideal for ISPs. The very compact and durable device is also equipped with integrated GPS, Bluetooth for simple initial setup from a mobile via the UISP mobile application and a Gigabit LAN port with PoE support. The device supports both bridge and NAT mode and supports 1080 and 2160MHz channel width in the 60GHz spectrum. The maximum bandwidth indicated by the manufacturer at 16 QAM is 2 Gbps (1 Gbps full duplex).

• Compact dimensions - 257 × 257 × 114 mm
• 60GHz spectrum with low interference - 57 to 71 GHz
• Range up to 5 km+ - depends on the regulation in the country used
• 2Gbps Throughput (1 Gbps FD)
• Supports half channel width to achieve longer distance or better availability in bad weather
• Supported channels: 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69200, 70200 MHz- depends on the place of use
• Gigabit LAN port with passive PoE support (24 or 48V DC)
• Built-in GPS
• Settings via web management and bluetooth - UISP mobile application 

DATA SHEET

Wave-Pico is a 60 GHz PtMP client device with built-in 5GHz Wifi 6 (802.11ax) backup radio. Max link range when used with Wave-AP is 1.3 km or 0.9 km when used with Wave-AP-micro. The throughput of the device is 2 Gbps(1 Gbps duplex) and 5 GHz backup can reach up to 800 Mbps. Unit is euiped with 1 Gbps LAN port with PoE 48V DC support. To simplify setup, the device is equipped with integrated Bluetooth to connect to the UISP mobile app or there is an option to setup via web interface.

Max. link range:
— Wave AP: 1.3 km
— Wave AP Micro: 0.9 km

Max. total throughput: 2 Gbps (1.5 Gbps duplex)

5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)

(1) GbE RJ45 port

Integrated Bluetooth