24V, 1A Power Adapter with Passive PoE Injector.
Very affordable and very popular 100Mbps passive 24V PoE injector MikroTik OEM HS24-2400 used to power most RouteBOARDs with PoE function. However, it can also be used to power other devices by supporting passive 24V PoE. The PoE injector supplies the device with free pairs of LAN cable 4,5 (+), 7,8 (-) and the total output power is 24W.
• Output Voltage: 24V
• Max Output Current: 1A
• Connector RJ45 LAN
• Connector RJ45 PoE
25G SFP28 DAC cable, passive, DDM - ML-DAC28+
ML-DAC28+ 25G SFP28 DAC cable, passive is a fast and cheap solution for easy connection of two network active switch/router elements at 1/10/25 Gbps without the need to purchase separate modules or other accessories (for example, optical patch cables). It goes without saying that multirate is supported, i.e. that in addition to SFP28 sockets it will be supported in both SFP and SFP+.
The quality twinax DAC cable comes with universal Cisco compatibility, which guarantees trouble-free use with most manufacturers of active elements. The DAC connecting cable is plugged directly into the SFP28 slot on the active element and immediately creates a connection at up to 25Gbps speeds. The connection using the DAC appears and behaves in the active element as a connection with classic SFP28 modules. Length 1m or 3m, passive design.
2G-15-120 - AirMax Sector Antenna, 15dBi Gain for 2.4GHz
AirMax 2.4GHz Carrier Class Sector 2x2 MIMO Antenna, 120 degree, 15dBi Gain for 2.4GHz. Rocket M and AirMax BaseStation/Rocket Antennas have been designed to seamlessly work together. Installing Rocket M on AirMax BaseStation/Rocket Antennas requires no special tools, you simply snap it into place with the mount provided with the Antennas.
2GE+2FE+ WIFI ONU
WiFi ONU (2GE+2FE+WiFi) is an EPON ONU terminal designed specially for TriplePlay services.
Physical Gigabit ports LAN1 and LAN2 are designed for IPTV, VoIP, etc. Services. They are connected directly to PON chipset, and configuration is made on central OLT unit using CTC mechanizm. Those ports are mostly configured as ends of VLANs transmited through PON network.
„Second part” of ONU is designed to Internet access.
360 Degree Omnidirectional Antenna, 15dBi Gain for 3.1 - 3.8 GHz
3km ML-S5531-3 - 1.25G SFP WDM(BiDi), SM, 1x LC, DDM, Cisco and MikroTik compatible
WDM SFP modules use 1 optical fiber for two-way connection, so you are able to double capacity of your optical cable without changing the cable. SFP module supports DDM - digital diagnostics monitoring. Modules are compatible with all MikroTik products and with others marked as "Cisco compatible".
ML-S5531-3 - Tx 1550 / Rx 1310nm
ML-S3155-3 - Tx 1310 / Rx 1550nm
4 DBI TUNED ANTENNA (EU 868) - McGill Microwave Systems
This McGill Microwave Systems 4dBi Tuned Antenna is optimized for high performance especially for the Helium Network. It offers higher coverage and increased HNT earnings thanks to its optimization.
The McGill Microwave Systems Antenna is optimized for the UK/EU Helium hotspots in the 868 frequency band. Often antennas are universal for more frequencies, but this results in suboptimal performance.
This antenna operates in the frequency range: 865 – 870 MHz UK/EU 865 UK & Europe, IN 865 India, RU 864 Russia. It has 4dBi gain and vertical polarization.
The antenna offers more than 7% improvement in transmitted power along with a 1.3:1 VSWR performance. It also results in reduced mis-matched loss when compared to many commercially available 2:1 VSWR performance. The antenna offers 58+/-1 degrees (4dBi) signal radiation footprint.
The McGill Microwave Systems Antenna uses N Type Male connector and it is made from fiberglass. It is 520mm high with 20mm in diameter. It weighs 0.8gh and it is rated for winds of up to 126km/h. It is RoHs Compliant and it also offers a mounting bracket, included in the box.
40 Pin IDE Flash Modle 128 MB
40G QSFP+ break-out cable to 4x10G SFP+ MikroTik - Q+BC0003-S+
Q+BC0003-S+ is break-out cable, which will let you enjoy all the benefits of our new switch with the 40 Gbps ports without upgrading your whole network setup. You can connect the CRS326-24S+2Q+RM to 4 other 10G SFP+ devices in a breeze, since the QSFP+ and SFP+ modules are integrated. The cable is 3 meters long, which should be enough for most setups.
40G QSFP+ DAC Cable - ML-DAC40G+1
ML-DAC40G+1 is a 40G QSFP+ DAC cable, passive is a fast and inexpensive solution for easy connection of two network active switch / router elements at 40Gbps without the need to purchase separate modules and other accessories (such as optical patch cables).
The high-quality twinax DAC cable comes with universal Cisco compatibility, which guarantees trouble-free use with most active element manufacturers. The DAC interface cable plugs directly into the QSFP+ slot on the device, creating a connection speed of up to 40Gbps. The connection using a DAC in the device also appears as a connection with classic QSFP+ modules. Length 1 or 2m (choose from menu), passive technology.
