CCR1036-12G-4S-EM - 36 core Tilera CPU, 16GB of RAM

CCR1036-12G-4S-EM is an carrier grade router with a cutting edge 36 core Tilera CPU! Unprecedented power and unbeatable performance - this is our new flagship device. Over 20 times faster than our previous top model, the Cloud Core supports throughput of up to 24 million packets per second, or up to 16 gigabits - full wire speed. The device comes in a 1U rackmount case, has four SFP ports, twelve Gigabit ethernet ports, serial console and a USB port. A color touchscreen displays device status, traffic graphs, or provide access to simple configuration options. It has two SODIMM slots, by default it is shipped with 16GB of RAM, but has no memory limit in RouterOS. It comes with power supply and 1U rackmount case. The cloud core router is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

Data Sheet

Quick Guide

Brand: MikroTik

Code: RB-CCR1036-12G-4S-ЕМ

Weight: 2.000 Kgs

Send to friend Rate this product Add to wishlist Compare

Details
Product code	CCR1036-12G-4S-EM
CPU nominal frequency	1.2 GHz
SFP DDMI	Yes
CPU core count	36
Architecture	Tile GX
Size of RAM	16 GB
10/100 Ethernet ports	0
10/100/1000 Ethernet ports	12
MiniPCI slots	0
MiniPCI-e slots	0
Number of USB ports	1
Power Jack	1
PoE out	No
PoE in	No
Supported input voltage	12 V - 28 V
Voltage Monitor	Yes
CPU temperature monitor	Yes
PCB temperature monitor	Yes
Dimensions	355x145x55cm
Operating System	RouterOS v6 (64bit)
Operating temperature range	Max ambient temperature 50C @1.2Ghz; 70C @1Ghz CPU core frequency
License level	6
Antenna gain DBI	No
Current Monitor	Yes
CPU	TLR4-03680CG-12CE-A3b
Max Power consumption	60W
SFP ports	4
SFP+ ports	0
USB slot type	microUSB type AB
Serial port	RS232
Suggested price	$1195.00

Ethernet test results

CCR1036-12G-4S-EM		Tile 36 core max possible throughput test
Mode	Configuration	1518 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Bridging	none (fast path)	1300.4	15792.1	3759.4	15398.5	28808.0	14749.7
Bridging	25 bridge filter rules	1300.4	15792.1	3760.4	15402.6	5163.5	2643.7
Routing	none (fast path)	1300.4	15792.1	3762.4	15410.8	28808.0	14749.7
Routing	25 simple queues	1300.4	15792.1	3762.4	15410.8	7643.1	3913.3
Routing	25 ip filter rules	1300.4	15792.1	3033.9	12426.9	3049.7	1561.4

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

CCR1036-12G-4S-EM		CCR1036 series IPsec throughput
Mode	Configuration	1400 byte		512 byte		64 byte
Mode	Configuration	kpps	Mbps	kpps	Mbps	kpps	Mbps
Single tunnel	AES-128-CBC + SHA1	130.5	1461.6	123.4	505.4	115.4	59.1
256 tunnels	AES-128-CBC + SHA1	912.9	10224.5	1037.4	4249.2	1053.1	539.2
256 tunnels	AES-128-CBC + SHA256	902.7	10110.2	1032.8	4230.3	1025.7	525.2
256 tunnels	AES-256-CBC + SHA1	901.0	10091.2	1028.3	4211.9	998.2	511.1
256 tunnels	AES-256-CBC + SHA256	892.5	9996.0	982.9	4026.0	970.7	497.0

All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

	S-35/53LC20D - A pair of 1.25G SFP transceivers with DDM supprot S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. The S-53LC20D is a 1.25G Single Mode optical SFP transeiver with an LC connector,T1550nm/R1310nm, which works for connections up to 20km and supports DDM. Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Price excl. tax: 109.00BGN. Price inc. tax: 130.80BGN. Quantity:
	S+31DLC10D - 10G SFP+ transceiver, LC connector, up to 10 kilometer, Single Mode S+31DLC10D is a 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections Units are tested and compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM. Units are compatible with non-MikroTik SFP devices as well. Price excl. tax: 218.00BGN. Price inc. tax: 261.60BGN. Quantity:
	1.25G SFP transceiver, DDM, 850nm, 550m S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Units are tested and compatible with RB260GS, RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP devices as well. Price excl. tax: 33.00BGN. Price inc. tax: 39.60BGN. Quantity:
	1.25G SFP, 1310nm Dual LC connector, up to 20km Single Mode, with DDM S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM support. Data Sheet Price excl. tax: 35.00BGN. Price inc. tax: 42.00BGN. Quantity: