5GHz Bridge
Compact, wireless point-to-point high-band bridge with a 1.2+ Gbps throughput rate.
Revolutionary Wireless Technology.
Introducing airFiber®, a truly revolutionary Point-to-Point wireless platform from Ubiquiti. Housed in a compact, highly efficient form factor, airFiber delivers amazing wireless gigabit+ performance, low latency, and long range. airFiber ushers in a new era in price-disruptive wireless technology ideal for carrier backhaul, building-to-building enterprise use, or public safety applications. Supports high-band 5 GHz frequencies.
Note. Price shown is for a single unit. airFiber® is normally purchased in pairs to form a single link.
AF-5XHD
• Programmable Transmit Power - The radio's transmit power level can be programmed up to +29 dBm.
• Programmable Duty Cycle (GPS synchronized frames) - The AF-5XHD allows configuration of asymmetric TX and RX duty cycles. TX ratios include 25%, 33%, 50%, 66.7%, and 75%
• Configurable GPS Synchronization - The AF-5XHD offers configurable support for 2, 2.5, 4, and 5 ms frames. Timing is compatible with all other synchronous systems.
• Split TX and RX Frequency - The radio can operate on different frequencies for TX and RX, allowing great flexibility for interference avoidance.
• Split TX and RX Channel Bandwidth - Support for different channel bandwidths for TX and RX allows users to scale required data capacity more efficiently.
• Adaptive Modulation up to 1024QAM
• Dual Redundant Gigabit Ethernet Ports with PoE.
• OFDM and OFDMA Support
• Bluetooth Wireless Configuration
• AlignLock™ Antenna Aiming Guard
• Wide Voltage Range, Enhanced Surge Protection
LHG XL 5 ac - RBLHGG-5acD-XL
The LHG XL 5 ac is Long Range 5GHz 802.11ac wireless device with an integrated dual polarization 27 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.
The device includes one 10/100/1000 Mbit Ethernet port to fully utilize speeds that 802.11ac protocol provides.
- LHG XL 5 ac (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
LHG XL HP5 -RBLHG-5HPnD-XL - MikroTik Integrated Antenna
The LHG XL HP5 is a 5GHz 802.11 a/n wireless device with an integrated dual polarization 27 dBi grid antenna and high TX output power, designed to reach up to 40km in point-to-point setups at full speed.
The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.
MikroTik NetBox 5 ax - L11UG-5HaxD-NB
NetBox 5 ax is a powerful dual-chain outdoor device that can fill multiple roles in your setups: AP/CPE/Point-to-point. The strong 5 GHz Wi-Fi 6 radio comes with handy SMA connectors. That means you can add a HGO-antenna-OUT and you’ve got yourself an excellent omnidirectional AP… or try the mANT30 PA antenna to create a powerful long-range point-to-point link!
This weatherproof board features a modern Qualcomm Maple CPU based on the ARM architecture, 256 MB of RAM, a USB port for extra storage or other needs, and a Gigabit Ethernet port with PoE-in.
We’ve designed the case to make a sysadmins life easier. You can open the case effortlessly with just one hand. At the bottom, concealed behind a protective door, you’ll find exits for Ethernet. Equipped with a mounting loop for easy tower/pole installation, it also offers a separate DIN rail mount.
If you’ve read this far, here’s a little bonus feature: we’ve kept the good old beeper for various alarms or creative outputs.
Mimosa C5C, 2x RSMA f connectors
C5c has been designed specifically to handle long-range backhaul (PTP), point-to-multipoint (PTMP) GigaPoP links, and PTMP MicroPoP links impaired by vegetation. Connectorized by design, the C5c mates with many popular antennas, delivering 500+ Mbps of TCP throughput.
Mimosa C6x
Mimosa C6x is an outdoor client unit in a robust chassis with high resistance to ambient interference, IP67 protection with integrated antenna with gain 8 dBi, the possibility of mounting a directional antenna from a wide range (12 to 25 dBi), support Wi-Fi 6E OFDMA technology (built on 802.11ax), including older Wi-Fi5/6 standards. The unit has a 2×2 MIMO radio part with a modulation speed of 2402 Mbps at 160 MHz and is able to operate in the frequency band 5150 to 6425 MHz. For network connection, the C6x unit has one Gigabit Ethernet with passive PoE support 48 to 56 V.
Key Features
- Wi-Fi 6E support OFDMA - OFDMA reduces C6x the impact of in-band interference across the used channel with significantly smaller parts of the used spectrum (2 MHz) instead of older OFDM solutions, where any interference affected the whole channel width.
- Supports 6GHz channels - 5 150 to 6 425 MHz
- Durable aluminum chassis, degree of protection IP67, operating temperature -40 to +55 C
- Support PtMP installation only
- 2×2 MIMO, 2 402 Mbps, 1024 QAM, 160 MHz
- High output power 27 dBm
- WiFi Interop wireless protocol
- Passive PoE power supply (48 to 56V)
- DATASHEET
NetMetal ac2 - RBD23UGS-5HPacD2HnD-NM
More power and advanced features, with the same design philosophy as its predecessors – the new NetMetal ac² AP is sturdy, reliable, easy to use and extremely capable. This is the best way to add IPsec hardware acceleration to your backhaul link! We have added an out-of-the-box 2.4/5 GHz dual-concurrent (2.4GHz and 5GHz can be used at the same time) band support – no need for additional tinkering! NetMetal ac² can handle massive loads, as it features an improved 4-core CPU and 256 MB RAM. There is a miniPCIe slot for an LTE or other wireless modules and an SFP port for fiber. The NetMetal ac² can be a very adaptable addition for all kinds of setups. Two RP-SMA connectors allow adding an antenna of your choice. If necessary, you can adapt the NetMetal ac² for lower range use with such antennas as our HGO-antenna-OUT screw-on omni antenna unit (not included; available for ordering seperately). The enclosure has an IP rating of IP54 with protection against splashing from any angle, but it can still be opened and closed with one hand. Very handy in rough environments!
PBE-5AC-500 - PowerBeam 5AC 500
airMAX ac devices feature a multi‑radio architecture to power a revolutionary RF analytics engine.
An independent processor on the PCBA powers a second, dedicated radio, which persistently analyzes the full 5 GHz spectrum and every received symbol to provide you with the most advanced RF analytics in the industry.
Data from the spectrum analysis and RF performance monitoring is displayed on the Main tab and airView Spectrum Analyzer of airOS V7.
PBE-5AC-ISO-Gen2 - PowerBeam AC Gen2 ISO
The PBE-5AC-ISO-Gen2 offers a rear housing with a metal-plated interior, designed to enhance RF shielding. Additionally, an included protective radome shields the PowerBeam 5AC ISO Gen 2 from nature's harshest elements.
The integrated isolator design spatially filters out interference, so the PBE-5AC-ISO-Gen2 delivers improved noise immunity in co-location deployments.
The dish reflector design of the PBE-5AC-Gen2 makes it an ideal CPE for deployments requiring maximum performance. A protective radome is available as an optional accessory for the PBE-5AC-Gen2.
Ubiquiti's airMAX engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
