Power Supply Unit, PSU
POE-BOX4 - PoE injector 4xLAN/PoE
POE-BOX4 is a passive PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector uses two pairs of Ethernet cable: 4,5 (positive pole) and 7,8 (negative pole). The power supply is connected via a standard 2.1/5.5mm power connector.
The passive PoE injector can be used in the range of 12 to 57V DC with a max. current of 1000mA / port.
POE-BOX4-G - Gigabit 4 port Injector
POE-BOX4-G is a passive Gigabit PoE injector suitable for powering up to 4 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector uses two pairs of Ethernet cable: 4,5 (positive pole) and 7,8 (negative pole). The power supply is connected via a standard 2.1/5.5mm power connector.
The passive PoE injector can be used in the range of 12 to 57V DC with a max. current of 1000mA / port.
POE-BOX8-G - 8 port Gigabit PoE injector
POE-BOX8-G is a passive Gigabit PoE injector suitable for powering up to 8 devices. Connectors marked "LAN" connect Ethernet ports without power supply eg switch, to the opposite side of "POE" connect devices using passive PoE. For powering PoE injector uses two pairs of Ethernet cable: 4,5 (positive pole) and 7,8 (negative pole). The power supply is connected via a standard 2.1/5.5mm power connector or via a special 4-pin terminal block. The passive PoE injector can be used in the range of 12 to 57V DC with a max. current of 1000mA / port.
POE-PAN12 - POE panel 12 ports, 1U for rack 19"
Ethernet ports without power supply (e.g. switch) are connected to RJ45 connectors marked as "DATA" on one side and devices using power supply via Ethernet cable are connected to the opposite side "POWER + DATA". POE-PAN12 is compatible with active elements using pins 4, 5 (+), pins 7, 8 (-). Especially useful for MikroTik and Ubiquiti networks. Power performance can be optimized according to the devices used and their configuration
POE-PAN12-G - Gigabit POE panel 12 ports, 1U for rack 19", shielded
Panel integrating 12 passive PoE injectors into a single 19"/1U panel suitable for powering up to twelve devices. Professional solution for remote powering of many active elements with passive PoE support.
You will achieve a powering centrum by adding this pass-through panel into data cabinet that you can easily connect between the existing switch and the patch panel, which already leads to the powered device (IP camera, IP phone, wireless devices, etc.). Power connectors are in standard size 2.1/5.5 mm and both powering all 12 ports according to the selected input:
- Mode A: Compatible with active components using 1,2 (-) and 3,6 (+) pins such as IP cameras, IP phones, wireless components, and other components using 802.3af/802.3at power adapters. All 4 pairs are for the data.
- Mode B: Compatible with active components using 4,5 (-) and 7,8 (+) pins such as Ubiquiti networks, MikroTik and other. All 4 pairs are for the data.
Attention: It is not possible to combine connection of Ubiquiti 100Mbps products requiring 24V power supply for example: NanoBeam, NSM5 with products requiring 48V power supply due to the different behaviour of Ubiquiti POE port powered by 24 V.
POE-PAN16 - POE panel 16 ports, 1U for 19" rack, shielded
Panel integrating 16 passive PoE injectors into a single 19" / 1U panel suitable for powering up to sixteen devices. Professional solution for remote powering of many active elements with passive PoE support.
Important features
- 19" rackmount design
- 16 ports with passive PoE support
- LED indicator to determine the functional power adapter
- The grounding screw on the rear panel to filter Surge
- Overvoltage protection on each port (650 mA/port)
- Input power connector - standard jack 2.1 / 5.5mm
Ethernet ports without power supply (e.g. switch) are connected to RJ45 connectors marked as "DATA" on one side and devices using power supply via Ethernet cable are connected to the opposite side "POWER + DATA". POE-PAN16 is compatible with active elements using pins 4, 5 (+), pins 7, 8 (-). Especially useful for MikroTik and Ubiquiti networks. Power performance can be optimized according to the devices used and their configuration.
POE-PAN24
Panel integrating 24 passive PoE injectors into a single 19"/1U panel suitable for powering up to sixteen devices. Professional solution for remote powering of many active elements with passive PoE support.
Ethernet ports without power supply (e.g. switch) are connected to RJ45 connectors marked as "DATA" on one side and devices using power supply via Ethernet cable are connected to the opposite side "POWER + DATA". POE-PAN24 is compatible with active elements using pins 4, 5 (+), pins 7, 8 (-). Especially useful for MikroTik and Ubiquiti networks. Power performance can be optimized according to the devices used and their configuration.
S-AD-155B industrial power supply - 27.6V 5A, 151.55W
Mikrotik OEM switching industrial power supply with 27.6V output, 5A maximum current and 155W total output power.
The source does not have a charging function, which is incorrectly indicated on the device label. Only CH1 terminals are used as output.
SCP-75-24 - Power Supply Unit with Battery Charger Function (UPS) 27,6V 2,7A
SCP-75 Series 27.6V, 2.7A Power Supply Unit with Battery Charger Function (UPS)
